EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Cost Controller is actually a remarkably successful solar controller made for off-grid photo voltaic units. According to multiphase synchronous rectification know-how, it guarantees optimized Vitality conversion and program security for an array of photovoltaic (PV) apps.
Critical Options of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Cost Controller technological know-how for superior solar energy harvesting. Critical characteristics include things like:
Multiphase Synchronous Rectification (MSR) for improved Electricity conversion.
Advanced MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for Improved battery everyday living.
Liquid crystal display Display screen with real-time information checking.
Several Load Management Modes which include guide and timer.
Detailed Digital Protections from overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Phase Guidebook to Creating the EPEVER Tracer AN Series Controller
one. Unboxing and Getting ready the Controller
Make certain all elements are incorporated: Tracer AN unit, temperature sensor, communication cables, and consumer manual.
Verify the product selection and voltage scores match your photo voltaic panel and battery technical specs.
two. Mounting the Charge Controller
Pick a perfectly-ventilated, dry area near to the battery bank.
Secure the Tracer AN controller using the presented mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Solar Cost Controller
Warning: Usually stick to good security protocols and ensure the method is run off ahead of connecting components.
Action 1: Connect the battery terminals into the cost controller (constructive to optimistic, negative to destructive).
Action 2: Join the photo voltaic panel array for the PV input terminals.
Action 3: Connect the load terminals if employing a visit here direct load connection.
Action 4: Double-check all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power within the controller by connecting the battery initial.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Guide, timer, mild Command.
five. Monitoring and Facts Logging
The Tracer AN Sequence supports serious-time checking using the MT50 distant meter.
Information is usually logged through the RS485 communication port using software such as Photo voltaic Station Computer.
Remote monitoring is feasible Using the EPEVER WiFi module.
six. Troubleshooting Frequent Challenges
Situation 1: No Electricity Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: Above-Voltage Security
Confirm the photo voltaic array’s voltage score.
Regulate technique parameters if necessary.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT settings from the menu.
Benefits of the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification technologies makes sure:
Larger Efficiency: Diminished energy losses through conversion.
Enhanced Dependability: Secure efficiency less than variable loads.
Extended Battery Lifestyle: Regular and exact charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation can be an Excellent option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned set up manual, people can ensure highest effectiveness and procedure longevity.